產品特點/Features:

◆采用單機頭設計，經濟實惠、使用成本低:

◆安裝簡單，視野寬闊，操作方便;

◆上下模板整體CNC加工,位置布局、加工尺寸精度高:

◆裝模部件全部熱處理，提高使用壽命:

◆左右位移由單伺服驅動精密絲桿，剛性連接，定位快速準確:

◆采用前后對夾設計，每個鉗爪張開閉合獨立調節、調整方便。定位快速準確;

◆采用準確值角度編碼器讀取沖床角度(機械手與沖床曲軸準確同步)保證了張開、閉合的準確性);

◆伺服系統選用了隔離三相電輸入的驅動器( 排除了零線于擾、保證了伺服電機的定位精度);

◆機頭和梁全部防水防塵全封閉結構，所有移動關節處加裝防水防塵機構:

◆本產品采用自主研發的SANYE-JXS-4.0工業操作系統，執行元件之間的聯動靈活、準確?？勺R別提示故障并報警全線停機的有:上料機/中頻爐卡料，上料機/中頻/沖床故魔、各工序的鉗爪均可識別粘沖頭、掛底芯、料沒夾到、沖孔的料沒打出鉗子移動過程時發生干涉、機械手缺油、沖床缺油、高頻缺水等故障。

◆Single head design,economical and low cost; 

◆Simple installation,wide vision, easy operation;

◆CNC machining of Upper and lower templates,high precision of position layout and 

machiningdimension; 

◆All the parts of the mould are heat treated to increase the service life

◆Left and right displacement driven by a single servo precision screw,rigid connection,

positioning fast and accurate;

◆The absolute value angle encoder is used to read the punchangle(the manipulator and

the punchcrankshaft are absolutely synchronized). which ensures the accuracy of 

opening and closing of the clamp claw

◆The servo system selects the driver which isolates the three-phase electrical input

leliminates thezero-line interference and ensures the positioning accuracy of the servo 

motor)

◆The Machine Head and beam are all waterproof and dust-proof completely closed

structure,and all moving joints are equipped with waterproof and dust-proof mechanism;

◆This product uses the SANYE-JXS-4.0 industrial operating system,which is developed

independenty.The linkage between the executive components is flexible and accurate.

Can identify the fault and alarmall line shutdown,are:feeding machine/if furnace material,

feeding Machine/intermediatefrequency/punch failure,the clamp claw of each working

procedure can identify sticking punch,hanging bottom core,material not clamped,

punching material not punched out,the camp movement occurs during the

interference,manipulator oil shortage, punch oil shortage, high frequency water

shortage and so on.